Item Description: KEF Model 103.2 Photo Gallery / 05103.2nakedbox
All images supplied by Steve Bell (email on Saturday 17 January 2004

Cabinet shown with drive units removed. Both drive units fit into rebated holes, the B200 aperture has a gasket strip fitted, whilst the T33 gasket is shown seated in the rebate. Both drive units screw into T-Nuts fitted on the rear of the front baffle. Construction is solid, using 18mm chipboard. The cabinet is damped by a lining of acoustic foam, 1inch thick on the sides and 2-3inches thick elsewhere, except on the front baffle. There are no bituminous panels to damp the cabinet, as in the Ref101. There is a chipboard brace between the B200 and T33 apertures.

Previous Home Next