View previous topic :: View next topic |
Author |
Message |
Dazman Introductory Contributor
Joined: 16 Jan 2006 Posts: 2
|
Posted: Mon Jan 16, 2006 4:38 am Post subject: Kef 104/2 |
|
|
Has anyone had a midrange replaced in this unit or know of a replacement midrange? I have one that refuses to work. |
|
Back to top |
|
|
Parts Senior Contributor 100+
Joined: 13 Jan 2006 Posts: 181 Location: Edinburgh
|
Posted: Mon Jan 16, 2006 9:23 pm Post subject: Kef 104.2 |
|
|
I cant remember if these are 4ohm or 8ohm ? |
|
Back to top |
|
|
Dazman Introductory Contributor
Joined: 16 Jan 2006 Posts: 2
|
Posted: Wed Jan 18, 2006 4:11 am Post subject: |
|
|
They are 4ohm. |
|
Back to top |
|
|
Parts Senior Contributor 100+
Joined: 13 Jan 2006 Posts: 181 Location: Edinburgh
|
Posted: Wed Jan 18, 2006 12:13 pm Post subject: |
|
|
Kef used to offer B110 1209X 4ohm replacement drivers , made under licence by Harbeth. |
|
Back to top |
|
|
dublin78 Junior Contributor 10+
Joined: 21 Mar 2006 Posts: 11 Location: Cheshire
|
Posted: Tue Mar 21, 2006 11:55 am Post subject: |
|
|
Hello
ScanSpeak make one (13M/8640 ). It is available from Wilmslow Audio @ ?104 + VAT. Yikes. Worse if you replace all four, though this must be the way forward.
Good luck
________
VIDEO REVIEWS
Last edited by dublin78 on Fri Feb 25, 2011 10:02 am; edited 1 time in total |
|
Back to top |
|
|
greve Introductory Contributor
Joined: 23 Oct 2006 Posts: 2
|
Posted: Sun Oct 29, 2006 5:07 pm Post subject: |
|
|
Dazman wrote: | They are 4ohm. |
Strange, I've just now taken my 104/2 apart and the sticker says B110 SP1190 8ohm... |
|
Back to top |
|
|
speakerguru Über Contributor 1000+
Joined: 18 Nov 2005 Posts: 1192 Location: Green Hut, Tovil
|
Posted: Mon Oct 30, 2006 1:00 pm Post subject: |
|
|
Dazman wrote: | They are 4ohm. |
Altogether now......Oh, no they're not.
The 104|2 was a 4 Ohm "resistive" system so the B110s were almost certainly both 8 Ohm units in parallel, so that you ended up with 4 Ohms after all the extra impedance compensation components. |
|
Back to top |
|
|
centaurus Senior Contributor 100+
Joined: 21 Apr 2006 Posts: 125 Location: Okland, CA
|
Posted: Thu Nov 02, 2006 6:49 pm Post subject: |
|
|
i don't think you can remove the B110 mids as they are chassis-less. not sure if you can retrofit in aftermarket drivers either. others might know more.
you might just have to keep an eye out on ebay for someone parting out the whole mid/tweeter cabinet. i've seen 3 on there the last 2 months or so. so, they do show up.
see ya,
Robby |
|
Back to top |
|
|
|