View previous topic :: View next topic |
Author |
Message |
fan4fan1 Junior Contributor 10+
Joined: 21 Sep 2004 Posts: 19 Location: South Pittsburg, TN
|
Posted: Fri May 18, 2012 12:37 am Post subject: Rubber Feet for 103/3, 104/2, etc. |
|
|
Looking for a single rubber foot to go over the adjustable spike on a pair of 103/3's. Only need the one but if you have a pair to sell that's good too.
Let me know what you want for it, I can Paypal immediately. Just completed my 80's KEF collection, at least as far as I want to go. I only have so much room!
And while I have your attention, is there a source for the stands for this speaker (103/3)? I'm sure this has been brought up before. My brother is standing by to make a pair from scratch using his own set as a reference, but I thought I might ask first.
John in Tennessee _________________ Danny and Emma are my life!! |
|
Back to top |
|
|
rx7rotary Intermediate Contributor 50+
Joined: 20 Feb 2012 Posts: 59
|
Posted: Mon May 21, 2012 12:18 am Post subject: |
|
|
John, are these the same as the rubber feet from Calindas? I have a set of those, happy to gift to you if you will pay for shipping. |
|
Back to top |
|
|
fan4fan1 Junior Contributor 10+
Joined: 21 Sep 2004 Posts: 19 Location: South Pittsburg, TN
|
Posted: Mon May 21, 2012 10:56 pm Post subject: Rubber Feet |
|
|
You're very kind! I really couldn't tell you if the Calinda feet are a match for the later 104/2, etc. Your generous offer is very appreciated, but I am afraid that if you send them to me and they don't match (fit) I would just have to send them back to you. Are you in England?
Tell you what, I'll try to take a picture of the feet on the 103/3's and post it. If it looks like a match, name your price for shipping. I can tell you this much, they have a hole in the center that allows for the spike that's screwed into the cabinet for floor mounting. The hole fits around the nut that is just above the spike (hope that makes sense). So when you put the foot on, you can actually tighten the whole thing with it.
I'll get that picture posted asap and we'll take it from there.
Thanks again, great to know there are other KEF nut's out there!
John _________________ Danny and Emma are my life!! |
|
Back to top |
|
|
rx7rotary Intermediate Contributor 50+
Joined: 20 Feb 2012 Posts: 59
|
Posted: Tue May 22, 2012 1:06 am Post subject: |
|
|
No problem , your description sounds about right, take some measurements but I think I have what you need. I will take a photo if you like and you can see whether this is correct what I have. I live in New Zealand.
I have been restoring a few Kef speakers, but Calindas I have taken these from were long put on metal spikes and my friend that bought them from me didnt want the original feet.
Its all about audio karma in the end
Mark |
|
Back to top |
|
|
fan4fan1 Junior Contributor 10+
Joined: 21 Sep 2004 Posts: 19 Location: South Pittsburg, TN
|
Posted: Thu May 24, 2012 12:01 am Post subject: |
|
|
If that sounds right, I think I'm ready to go ahead and get a quote on the shipping! _________________ Danny and Emma are my life!! |
|
Back to top |
|
|
fan4fan1 Junior Contributor 10+
Joined: 21 Sep 2004 Posts: 19 Location: South Pittsburg, TN
|
Posted: Thu May 24, 2012 12:09 am Post subject: |
|
|
Oops, posted too soon. Should do this before my third scotch.
I recently had my 104/2's woofers re-built by a professional. They are re-installed and sound wonderful! Bought the 104/2's new in Nashville, Tennessee on March 31'st 1986. They still look and sound wonderful. Since then I've added a pair of 107's, 102's and 103.2's, a nice pair of 104 AB's, a perfect set of 101's, and now I have a set of 103/3's on their way.
Again - it's great to know there are other KEF enthusiasts out there. Let me know what you think is appropriate for shipping to Chattanooga, TN 37405 and I will Paypal you right away.
John _________________ Danny and Emma are my life!! |
|
Back to top |
|
|
rx7rotary Intermediate Contributor 50+
Joined: 20 Feb 2012 Posts: 59
|
Posted: Mon May 28, 2012 10:54 pm Post subject: John |
|
|
Hi mate,
Please PM me, in regards to details.
I am happy to ship to you , just dont know where you are based.
Thanks
m |
|
Back to top |
|
|
fan4fan1 Junior Contributor 10+
Joined: 21 Sep 2004 Posts: 19 Location: South Pittsburg, TN
|
Posted: Fri Jun 01, 2012 3:33 am Post subject: |
|
|
PM'd you, but I thought I would go ahead and post my address here too. They can be shipped to:
John O'Hailey
711 Signal Mountain Road PMB #230
Chattanooga, TN 37405
Am standing by to Paypal you whatever you need for the shipping cost.
Thanks again.
John _________________ Danny and Emma are my life!! |
|
Back to top |
|
|
rx7rotary Intermediate Contributor 50+
Joined: 20 Feb 2012 Posts: 59
|
Posted: Sun Jun 10, 2012 11:54 pm Post subject: |
|
|
hey John, let me know when you receive this, I am really interested to know how long it takes to get stuff from nz.
M |
|
Back to top |
|
|
fan4fan1 Junior Contributor 10+
Joined: 21 Sep 2004 Posts: 19 Location: South Pittsburg, TN
|
Posted: Mon Jun 11, 2012 12:02 am Post subject: |
|
|
Will do! _________________ Danny and Emma are my life!! |
|
Back to top |
|
|
fan4fan1 Junior Contributor 10+
Joined: 21 Sep 2004 Posts: 19 Location: South Pittsburg, TN
|
Posted: Fri Jun 15, 2012 11:54 pm Post subject: |
|
|
Received today, thanks much!
John _________________ Danny and Emma are my life!! |
|
Back to top |
|
|
|