SpeakerTalk Forum Index SpeakerTalk
This forum has been set up to facilitate discussion of 1970s KEF speakers and drive units. The owner of the Forum has no connection with KEF Audio.
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

104aB STAND'S

 
Post new topic   Reply to topic    SpeakerTalk Forum Index -> KEF Speakers from the 1970s
View previous topic :: View next topic  
Author Message
hector smith
Junior Contributor 10+


Joined: 23 Oct 2012
Posts: 15
Location: Bettyhill

PostPosted: Sun Nov 04, 2012 11:28 pm    Post subject: 104aB STAND'S Reply with quote

Hi.
Can any 1 tell me what kind of stands were intended to be used or what is best to be used with the 104aB's.
Back to top
View user's profile Send private message
speakerguru
VIP Contributor 750+


Joined: 18 Nov 2005
Posts: 959
Location: Green Hut, Tovil

PostPosted: Sun Nov 04, 2012 11:41 pm    Post subject: Reply with quote

They were demonstrated by KEF at hi-Fi shows in the 70s on stands made of 3/4" square steel tube about 1 ft off the ground.
Back to top
View user's profile Send private message
hector smith
Junior Contributor 10+


Joined: 23 Oct 2012
Posts: 15
Location: Bettyhill

PostPosted: Sun Nov 04, 2012 11:57 pm    Post subject: Reply with quote

Thanks speakerguru.
would you spike the stand's top and bottom?
Back to top
View user's profile Send private message
speakerguru
VIP Contributor 750+


Joined: 18 Nov 2005
Posts: 959
Location: Green Hut, Tovil

PostPosted: Mon Nov 05, 2012 3:16 pm    Post subject: Reply with quote

I use double-sided tape from speaker to stand. I would only use spikes if I had a thick carpet.
Back to top
View user's profile Send private message
Innercity126
Intermediate Contributor 25+


Joined: 25 Oct 2011
Posts: 39
Location: Sea World, Texas

PostPosted: Thu Nov 08, 2012 12:47 am    Post subject: Re: 104aB STAND'S Reply with quote

hector smith wrote:
Hi.
Can any 1 tell me what kind of stands were intended to be used or what is best to be used with the 104aB's.


Hi Hector,

Below is a link to a business I use for stands for vintage type loudspeakers. I'm not sure if they ship worldwide, so you may want to check. Hope this helps.

William


http://www.aandmcustomsteelspeakerstands.com/
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    SpeakerTalk Forum Index -> KEF Speakers from the 1970s All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group