View previous topic :: View next topic |
Author |
Message |
erik_bjorge@hotmail.com Introductory Contributor
Joined: 04 Aug 2016 Posts: 3
|
Posted: Fri Nov 11, 2016 12:08 am Post subject: Naim+ kube 103.3 |
|
|
Hi
I have a nice Naim cb nac 32.5(with ryanlab boards)/ avondale tpx1/ cb Naim 160 and Kef ref 103.3.....and bryston bda-2/bdp-1as source
How to connect - and what kind of cables do I need to connect the kube...?
Erik |
|
Back to top |
|
|
speakerguru Über Contributor 1000+
Joined: 18 Nov 2005 Posts: 1192 Location: Green Hut, Tovil
|
Posted: Fri Nov 11, 2016 10:17 am Post subject: |
|
|
Please read the sticky
http://www.hifiloudspeakers.info/speakertalk/viewtopic.php?t=1723
re signal levels.
I suggest you use 5 pin DIN to 4 phono leads whether you use the tape monitor or the pre to power option. In the latter case you will only use two of the 4 leads going from preamp to KUBE. You will need a further 5pin DIN to 2 phonos for the KUBE to power amp. |
|
Back to top |
|
|
erik_bjorge@hotmail.com Introductory Contributor
Joined: 04 Aug 2016 Posts: 3
|
Posted: Fri Nov 11, 2016 11:38 am Post subject: |
|
|
speakerguru wrote: | Please read the sticky
http://www.hifiloudspeakers.info/speakertalk/viewtopic.php?t=1723
re signal levels.
I suggest you use 5 pin DIN to 4 phono leads whether you use the tape monitor or the pre to power option. In the latter case you will only use two of the 4 leads going from preamp to KUBE. You will need a further 5pin DIN to 2 phonos for the KUBE to power amp. |
Hi
Thanks!
Erik |
|
Back to top |
|
|
|